Pressure washers are convenient cleaning devices that can be utilized for a number of cleaning purposes at both home and commercial scale applications. These machines are either controlled by gas or power. Pressure washers are not like any other cleaning equipment’s, they have to be used correctly for getting the right results. Given below are some of the most important tips and tricks to keep in mind while using pressure washers for industrial and commercial usage. Read more to find out.
1. Security First
A weight washer isn’t a toy. As weight and volume increments, so does the potential for damage. Therefore you have to be extremely careful. Always have safety gear handy. Put on some protective gear such as safety glasses before using the washer. Never point the splash at yourself or someone else as it could be dangerous.
2. Nozzle Selection
Two most important factors to keep in mind while choosing the nozzle for your pressure washer are the spray angle and the nozzle hole size. These decide the GPM or water flow rate per minute. It determines how many gallons of water should come out of the shower head each minute at a specific weight of the water stream. To decide the size of the nozzle you have to know the GPM (gallons every moment) and PSI (pounds per square) depending upon the activity you are doing. Also understand that the nozzle size and the PSI are inversely proportional to each other although the flow remains the same.
3. Testing the power
Test your weight washer for its capacity. The best way is to choose a location and begin showering couple of feet away from any article. Gradually reduce the distance from the surface you need to clean. Move your wand side-to-side a few times and check if the surface is perfect. In the event that extra cleaning is required, draw your wand bit by bit nearer to the surface (approx. 1-2 feet). The explanation behind the continuous cleaning is on account of weight washers are greatly intense and on the off chance that you begin excessively close you could harm the surface or object as opposed to cleaning it.
4. Buy the Right Hose
If you want your machine to work flawlessly then you have to guarantee that you are using the right hose. Although most pressure washers are provided with a hose, you might have to change it or buy a new one depending upon your needs. Also, don’t forget to buy a quality product and never settle for cheap ones as they won’t guarantee perfection.
5. Follow the right methods
Hold the tip of the weight washing spout at an edge over the surface you are cleaning and at a separation to avoid harm. Always abstain from showering water behind or under vertical surfaces, for example, lap siding, and into light installations or cooling hardware, electrical outlets, soffit vents, or storage room vents.
Follow the given tips to ensure that you are using the pressure washer correctly without causing any harm to yourself and others.